Vision Din-Rail IO (& CANbus)

Description

Expansion adapters come in different variants, but you need to choose only one of them for each PLC.

EX-A2X Local expansion adapter, 12/24VDC, OPTO Isolated Max 30m, comes with 1 meter cable.
EX-RC1 Remote expansion adapter via CANbus, 12/24VDC
EX-D16A3-RO8 16 Digital Inputs / 3 Analogue Inputs / 8 Relay Outputs, includes IO adapter, 24VDC & 1 meter Cable
EX-D16A3-TO16 16 Digital Inputs / 3 Analogue Inputs / 16 Transistor Outputs, includes IO adapter, 24VDC & 1 meter Cable

The EX adaptors are a stand alone expansion adaptor which connects to the PLC via a CAT5 style cable and to a further eight IO modules via ribbon cable. In all cases, these cables are included with the modules where required. With additional length options available from stock, up to 30 meters long.

The EX-RC1 adaptor is a stand alone network adaptor that connects to up to eight IO modules via ribbon cables but then connects to the master PLC on a CANbus network. The CANbus cable is user supplied.

The EX-XL IO modules are expansion units with an integral adaptor and connect to the PLC via a CAT5 style cable, then up to seven more IO modules via ribbon cable. If required the PLC may be expanded via both local and remote IO (M90/91 via local only) up to the IO limit of the particular PLC model, see user guides. Only one local expansion adaptor may be used with up to eight extra modules (seven if the integral EX-XL module is used). Further IO expansion, up to the IO limit, must then be made via CANbus.

Up to 8 DIN-Rail-mounted IO modules can be added to each expansion adapter (7 if using EX-RC1) from the list below.-

IO-DI16 16 Digital Inputs, 24VDC
IO-DI8-RO4 8 Digital Inputs / 4 Relay Outputs, 24VDC
IO-DI8-RO8 8 Digital Inputs / 8 Relay Outputs, 24VDC
IO-DI8-TO8 8 Digital Inputs / 8 Transistor Outputs, 24VDC
IO-RO16 16 Relay Outputs, 24VDC
IO-RO8 8 Relay Outputs, 24VDC
IO-TO16 16 Transistor Outputs, 12/24VDC
IO-DI8ACH 8 110/220VAC Digital Inputs
IO-AI4-AO2 4 Analogue Inputs / 2 Analogue Outputs
IO-AI8 8 Analogue Inputs 14 bit (NO TC’s)
IO-AO6X 6 Isolated Analogue Outputs, 12 bit
IO-ATC8 8 Thermocouple/Analogue Inputs
IO-PT400 4 PT100 / NI100 / NI120 Inputs
IO-PT4K 4 PT1000 / NI1000 Inputs
IO-LC1 1 Loadcell/Strain gauge Input, 1 Digital Input / 1 Setpoint Digital Output
IO-LC3 3 Loadcell/Strain gauge Inputs, 1 Digital Input / 1 Setpoint Digital Output
IO-D16A3-RO16 16 Digital Inputs / 3 Analogue Inputs / 16 Relay Outputs, 24VDC
IO-D16A3-TO16 16 Digital Inputs / 3 Analogue Inputs / 16 Transistor Outputs, 24VDC

IO+ Interface and Cables

The screens can have addition or only DIN rail mounted IO using the interfaces below and some of the additional IO modules shown (IO+) and / or the On board IO.
For DIN rail mounted IO you will need an interface unit, first.
	Inputs					Outputs
Part No.	Digital (Isolated)	HSC/ Shaft Encoder	Analogue	Temp Measurement	Weight Measurement	Transistor (Isolated)	PWM/HSO	Relay	Analogue	Manuals
EX-D16A3-RO8	16 pnp/npn	2 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	None	None	8	None
EX-D16A3-TO16	16 pnp/npn	1 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	15 pnp 1 pnp/npn	1 pnp 0.5kHz	None	None
EX90-DI8-RO8	8	1	None	None	None	None	None	8	None
EXF-RC15	9 pnp/npn	3 200kHz 32-bit	None	None	None	4 npn	4(Up to 3 PTO)	2	None
EX-A2X (was EX-A1)	*Needed for IO expansion Local I/O adaptor allows the connection of up to 8 I/O expansion modules per PLC. 1m cable includedOnly 1 EX-A2X module per PLC (If more I/O modules are required the EX-RC1 can be used)
EX-RC1	*Needed for IO expansion Remote I/O adaptor module via CANbus, multiple EX-RC1 adaptors may be connected to each PLC with up to 8 I/O expansion modules per adaptor.Multiple EX-RC1 modules can be used per PLC.
Expansion adapter cables*
EXL-CAB050	Expansion cable (0.5m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB100	Expansion cable (1m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB200	Expansion cable (2m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB295	Expansion cable (2.95m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB400	Expansion cable (4m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB500	Expansion cable (5m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB600	Expansion cable (6m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB1000	Expansion cable (10m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB1200	Expansion cable (12m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB2000	Expansion cable (20m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
EXL-CAB3000	Expansion cable (30m) For use with EX-A2X and Expansion I/O modules beginning EX-D…..
If you need help configuring your Inputs and Outputs please feel free to contact us.
We also offer software support.
IO = Inputs and Outputs

IO+ Digital Expansion

The screens can be expanded via DIN rail mounted IO using the interfaces below together with the on board/ Snap-in IO and ethernet IO expansion options.
Digital Inputs and Outputs (12V DC available on request)
	Inputs					Outputs
Part No.	Digital (Isolated)	HSC/ Shaft Encoder	Analogue	Temp Measurement	Weight Measurement	Transistor (Isolated)	PWM/HSO	Relay	Analogue	Manuals
IO-DI8-TO8	8 pnp/npn	1 5kHz 16-bit	None	None	None	8 pnp	None	None	None
IO-DI8-RO4	8 pnp/npn	1 5kHz 16-bit	None	None	None	None	None	4	None
IO-DI8-RO8	8 pnp/npn	1 5kHz 16-bit	None	None	None	None	None	8	None
EX90-DI8-RO8	8 pnp	1 5kHz 16-bit	None	None	None	None	None	8	None
IO-DI16	16 pnp/npn	1 5kHz 16-bit	None	None	None	None	None	None	None
IO-TO16	None	None	None	None	None	16 pnp	None	None	None
IO-RO8	None	None	None	None	None	None	None	8	None
IO-RO16	None	None	None	None	None	None	None	16	None
IO-DI8ACH	8 AC	None	None	None	None	None	None	None	None
IO-D16A3-RO16	16 pnp/npn	2 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	None	None	16	None
IO-D16A3-TO16	16 pnp/npn	1 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	15 pnp, 1 pnp/npn	1 pnp 0.5kHz npn 50kHz	None	None
EX-D16A3-RO8	16 pnp/npn	2 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	None	None	8	None
EX-D16A3-TO16	16 pnp/npn	1 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	15 pnp 1 pnp/npn	1 pnp 0.5kHz npn 50kHz	None	None
If you need help configuring your Inputs and Outputs please feel free to contact us.
We also offer software support.
IO = Inputs and Outputs

IO+ Analogue Expansion

The screens can have addition or only DIN rail mounted IO using the interfaces below and some of the additional IO modules shown (IO+) and / or the On board IO.
Analogue, Thermocouple, PT100, PT1000 and Load cell units
	Inputs					Outputs
Part No.	Digital (Isolated)	HSC/ Shaft Encoder	Analogue	Temp Measurement	Weight Measurement	Transistor (Isolated)	PWM/HSO	Relay	Analogue	Manuals
IO-AI4-AO2	None	None	4 0-10V, 0-20mA, 4-20mA 12-bit	None	None	None	None	None	2 ±10V 12-bit+sign, 0-20mA, 4-20mA 12-bit
IO-PT400	None	None	None	4 PT100/NI100/NI120	None	None	None	None	None
IO-PT4K	None	None	None	4 PT1000/NI1000	None	None	None	None	None
IO-AO6X	None	None	None	None	None	None	None	None	6 (Isolated) 0-10V, 0-20mA, 4-20mA 12-bit
IO-LC1	1 pnp	None	None	None	1 Loadcell / Strain gauge	2 pnp	None	None	None
IO-LC3	1 pnp	None	None	None	3 Loadcell / Strain gauge	2 pnp	None	None	None
IO-ATC8	None	None	8 Thermocouple, 0-10V, 0-20mA, 4-20mA 14-bit		None	None	None	None	None
IO-AI8	None	None	8 0-10V, 0-20mA, 4-20mA 14-bit	None	None	None	None	None	None
IO-D16A3-RO16	16 pnp/npn	2 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	None	None	16	None
IO-D16A3-TO16	16 pnp/npn	1 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	15 pnp, 1 pnp/npn	1 pnp 0.5kHz npn 50kHz	None	None
EX-D16A3-RO8	16 pnp/npn	2 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	None	None	8	None
EX-D16A3-TO16	16 pnp/npn	1 30kHz 16/32-bit	3 0-20mA, 4-20mA 10-bit	None	None	15 pnp, 1 pnp/npn	1 pnp 0.5kHz	None	None
If you need help configuring your Inputs and Outputs please feel free to contact us.
We also offer software support.
IO = Inputs and Outputs

Technical Drawings

VisiLogic

VisiLogic is an easy to use and intuitive programming software that is included with this product.

VisiLogic is a powerful software package that allows the Vision™ series of integrated PLC & HMI to be programmed easily and quickly. The software has a familiar intuitive feel and incorporates many advanced features such as discrete program routines, function blocks, data tables, data logging, trending and alarm handling. All of the standard maths functions are available and complex formula can be developed without the need to have a degree in computer science!

The integrated intuitive function blocks really make the Vision™ series the powerful devices that they are. There are many pre-set function blocks available performing a wide variety of advanced tasks as easily as dropping & dragging an icon into your program and configuring a few parameters.

Subjects such as CAN Open networking, Modbus communications, pulse trains outputs and bespoke serial communication protocols all have function blocks available to make the programmers life less difficult. To find out more detail about the range of function blocks available visit the VisiLogic software page HERE.

You can use VisiLogic and the associated software utilities to program, control, access and download data to and from the PLC remotely and directly.

Get more information about the VisiLogic programming software HERE

Description

Expansion adapters come in different variants, but you need to choose only one of them for each PLC.

Up to 8 DIN-Rail-mounted IO modules can be added to each expansion adapter (7 if using EX-RC1) from the list below.-

IO+ Interface and Cables

IO+ Digital Expansion

IO+ Analogue Expansion

Technical Drawings

VisiLogic

You may also like…

Vision 700™ 7″ – Touchscreen PLC & HMI

UniCloud Subscription

UMI-B1 Series – STO (Variable Speed Drives) – UMI-0022BE-B1

Vision 1210™ – 12″ Touchscreen PLC & HMI

Vision Din-Rail IO (& CANbus)

Description

Expansion adapters come in different variants, but you need to choose only one of them for each PLC.

Up to 8 DIN-Rail-mounted IO modules can be added to each expansion adapter (7 if using EX-RC1) from the list below.-

IO+ Interface and Cables

IO+ Digital Expansion

IO+ Analogue Expansion

Technical Drawings

VisiLogic

Related products

UniStream® PLC with Virtual HMI

Vision 130™ – 2.4″ Monochrome PLC & HMI

Vision 280™ – 4.7″ Monochrome PLC & HMI (V280-18-B20B)

Lutze Regulated, 240 W Power Supply – i4A-722759

You may also like…

Vision 700™ 7″ – Touchscreen PLC & HMI

UniCloud Subscription

UMI-B1 Series – STO (Variable Speed Drives) – UMI-0022BE-B1

Vision 1210™ – 12″ Touchscreen PLC & HMI